-14%
Acty Brake Kit
Price range: $185.00 through $215.00
Save even more on your Acty brakes when you buy our WILLpowered full brake kit. This kit includes everything you need to refresh your front and rear brakes in any HA-1/2/3/4 truck or HH-1/2/3/4 van. These work 100% as they should but the hole for the mounting screw is slightly off for ONLY the solid rotors. For this reason this batch of rotors and brake kits are discounted and sold AS-IS.
Cross drilled and slotted rotors fit 100% as intended and all holes align for mounting screws.
Kit includes:
(2) front rotors
(1) set of WILLpowered ceramic front brake pads
(1) set of rear brake pads
Shipping
Additional information
| option |
Cross drilled ,Solid rotor |
|---|
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
Fuel Injector DEKA IV, 40 lb/hr
6 AN x 5ft black hose with straight fittings
Honda Acty Window Washer Nozzle
Honda Acty Brake Spacers
Honda Acty big brake kit spacers so you can install EG civic brakes or better. These custom WILLpowered spacers go behind the rotors to give proper clearance to the bigger calipers. Don’t be fooled by copy cats, these are CNC’d to the proper thickness and not just cut from sheet metal.
Standard kits come with 4 hex head screws which are longer to attach the rotors to the hub. Longer wheel studs are optional but the hub may need to be removed or the knuckle notched to swap in place. Bigger brakes require a minimum of 13″ rims.
*****UPDATE***** Longer studs are now 55mm total length with 45mm of threads.
https://youtu.be/9rrGFRGw3Y4?si=uGWmoQhCquhqPM_5
Select options
This product has multiple variants. The options may be chosen on the product page
Honda Acty Transmission Case Seals
These are the seals for the cv axles where they enter the transmission. This is for both the left and the right seals for HA-1/2/3/4 as well as vans HH-1/2/3/4. If you need only one seal let us know but if one is bad, the other is surely on its way.
Note: the Acty Attack models have a different size seal on the passenger side to support the locking diff – these DO NOT fit the Attack model passenger side.
Related products
24 mm coolant connector with a 25 mm lip and 1/8 npt fitting, 68 mm in length
The 24 mm coolant connector by WILLpowered is designed with a 25 mm lip and 1/8 NPT fitting, making it suitable for connecting coolant hoses in car and truck engines. With a length of 68 mm, this connector provides a secure and reliable connection for optimal engine cooling performance. Built to high standards of quality, this product is a durable and essential component for maintaining the engine cooling system in top condition.
Honda Acty Front Brake Rotors
Replace those rusty 25 year old rotors with these new ones. Fits all HA-3/4 trucks and HH-3/4 vans, sold in pairs (price is for 2 front rotors). The current batch of solid rotors ONLY has the holes for the mounting screw slightly misaligned. This means that the rotor will fit and work as it should but will ultimately be held on by just the rim and lugnuts (just like some other stock setups).
Cross Drilled rotors are designed for maximum efficiency under braking and look amazing while doing so. Mounting holes for Cross Drilled Rotors are 100% correct.
Honda Acty Fuel Filter
Your fuel filter is probably 25 years old and allowing gunk into your carb stealing those precious few horsepower. Get this new filter installed not just for piece of mind but to keep you lines running clean.
*****UPDATE*****
After complaints we have switched suppliers so that the filter has the correct size nipple. Previous filters we sold (and others sell) have plastic nipples larger than stock and can make it almost impossible to get the fuel lines back on. 25 year old dried out rubber makes the issue even worse. From now on we will only sell the filters that are the correct size even if we have to charge a few dollars more.
Honda Acty Shift Bushing Kit
This is a custom made and sourced shift bushing kit for the Honda Acty/Street HA3/4 and HH3/4. Most of the play experienced in the old shifters is from the cup bushing, which is no longer produced. We have developed a replacement bushing and now offer it as a full shift bushing replacement kit. The full kit includes the cup bushing, six flange bushings, five thrust washers to replace the stock parts and use as shims (if necessary), two sleeve bushings, two cotter pins and grease. These kits will also fit the attack trim level and replaces all bushings in that model. Base bushings are now included as standard. Installation video is on our Willpowered YouTube channel.
BASE BUSHINGS ARE INCLUDED!!!
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit.
