Cheap Acty Spark Plug Wires
$5.00
These wires are the ones we were using previously that MAY RIP DURING REMOVAL!!!!!!! This is why they are $5. They work great installed and if you are careful while removing and pull from the black fitting they probably won’t rip, but you’ve been warned. For $5 it might be best just to get two sets. Honda Acty spark plug wires in red for HA-1/2/3/4 and HH-1/2/3/4. Our other sets are stronger and don’t rip but are more expensive.
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Honda Acty Magnetic Oil Plug
WILLpowered magnetic drain plug for the Honda Acty. Collect that ferrous material in between oil changes and some that has been having out for 25 years. Comes with a new crush washer and a 14mm wrench head.
Tighten till snug. One customer reported a plug breaking at 30ftlbs of torque, if using a torque wrench it should be below that.
May fit other brands but we have not confirmed which ones yet.
Honda Acty Stage 1-M
Here is our Honda Acty Stage 1-M(Maintenance) kit! Buy all your filters at the same time and save money. Our famous WILLpowered magnetic drain plug is also half off if you purchase it with the kit. This kit is for anyone doing basic maintenance but targeted to those picking up their trucks at the port for the first time. All parts fit HA-1/2/3/4 and vans HH-1/2/3/4.
Kit includes:
(1) WILLpowered Acty air filter (carb models only)
(1) Honda oil filter
(1) Acty fuel filter (with correct size nipples)
(1) WILLpowered magnetic drain plug (optional)
Honda Acty Plug and Play Stereo
This simple but effective bluetooth stereo fits perfectly into the single DIN location for a Honda Acty. The harness has been modified with connectors that plug directly into the Honda Acty wiring harness and therefore no cutting or splicing of wires is required for install. This plugs directly in Acty/Street harnesses but there are several different versions we have encountered and you must verify before ordering. Shown in the pictures you can see the 6/4 pin which is usually for a stock Clarion unit, a 4/4pin which is usually in 1994 and up trucks and a 4/2pin usually found in 1990-93 trucks. The Vans often have the 16 pin but it is also found in some trucks. Stock trucks only have a passenger 4″ speaker so if you install a drivers side speaker and run the wires you will simply connect to the second set of speaker wires on the harness. This harness will send a signal to stock driver side wires that dead end behind the steering wheel. The newest version of this stereo does not allow us to tap the back of the stereo for mounting like in our youtube video. You can still install this stereo very easily using the supplied metal cage like any aftermarket single DIN stereo. For an easy install please visit our Youtube page and watch our video and search single din stereo install for videos on the metal bracket. If you are unsure about what pin variation you have we can usually tell with a picture from your phone just reaching behind your stock stereo, no need to disconnect so please feel free to just ask.
Related products
Honda Acty pillar pod trim
Almost two years in the making, our Ronin Werks team has been working behind the scenes to develop these Acty pillar pod trims. We scanned real Honda trim that had been molded with pods to ensure an exact fit into your truck/van. Next, injection molding was the solution to get the quality and durability we insist on. The molding process creates a 95% finished product so customers may wish to paint, texture or trim the piece prior to final installation. We chose to keep the divers side a solid piece to maintain a finished look. To install the handle holes will need to be added prior to installation.
Honda Acty Shift Bushing Kit
This is a custom made and sourced shift bushing kit for the Honda Acty/Street HA3/4 and HH3/4. Most of the play experienced in the old shifters is from the cup bushing, which is no longer produced. We have developed a replacement bushing and now offer it as a full shift bushing replacement kit. The full kit includes the cup bushing, six flange bushings, five thrust washers to replace the stock parts and use as shims (if necessary), two sleeve bushings, two cotter pins and grease. These kits will also fit the attack trim level and replaces all bushings in that model. Base bushings are now included as standard. Installation video is on our Willpowered YouTube channel.
BASE BUSHINGS ARE INCLUDED!!!
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit.
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
Titanium wheel studs for Honda
Titanium wheel studs that fit Honda branded vehicles but specifically designed for the Acty and Street. Lighter and stronger than our previous extended wheel studs they can be a unique addition to your vehicle. Laser etched with the Ryoku Kanji to symbolize the added strength.
Highly recommend using a wheel stud installer while installing otherwise you may damage whatever lugnut etc you are using for install.
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.