Honda Acty Idler Bearing
$50.00
A broken timing belt will lead to damaged valves and if your pulleys fail then so does your timing belt. Sold individually here or as a kit with our timing belts, also listed on our site.
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Cheap Acty Spark Plug Wires
These wires are the ones we were using previously that MAY RIP DURING REMOVAL!!!!!!! This is why they are $5. They work great installed and if you are careful while removing and pull from the black fitting they probably won’t rip, but you’ve been warned. For $5 it might be best just to get two sets. Honda Acty spark plug wires in red for HA-1/2/3/4 and HH-1/2/3/4. Our other sets are stronger and don’t rip but are more expensive.
Honda Acty Plug and Play Stereo
This simple but effective bluetooth stereo fits perfectly into the single DIN location for a Honda Acty. The harness has been modified with connectors that plug directly into the Honda Acty wiring harness and therefore no cutting or splicing of wires is required for install. This plugs directly in Acty/Street harnesses but there are several different versions we have encountered and you must verify before ordering. Shown in the pictures you can see the 6/4 pin which is usually for a stock Clarion unit, a 4/4pin which is usually in 1994 and up trucks and a 4/2pin usually found in 1990-93 trucks. The Vans often have the 16 pin but it is also found in some trucks. Stock trucks only have a passenger 4″ speaker so if you install a drivers side speaker and run the wires you will simply connect to the second set of speaker wires on the harness. This harness will send a signal to stock driver side wires that dead end behind the steering wheel. The newest version of this stereo does not allow us to tap the back of the stereo for mounting like in our youtube video. You can still install this stereo very easily using the supplied metal cage like any aftermarket single DIN stereo. For an easy install please visit our Youtube page and watch our video and search single din stereo install for videos on the metal bracket. If you are unsure about what pin variation you have we can usually tell with a picture from your phone just reaching behind your stock stereo, no need to disconnect so please feel free to just ask.
EFI kit for Acty MKI
This is a kit to switch your carbureted HA-3/4-HH-3/4 to fuel injection. During the development of this kit we have never had a truck not start even when we have had erroneous base settings. This has proven that it is ready to be sold for its number one purpose, curing any and all issues associated with the older carb models. This kit includes everything you need to switch to fuel injection associated with the engine bay. Other things you will need to make this kit work are a high pressure fuel pump such as the walbro 250 and an adjustable fuel pressure regulator. We have designed this kit around the AMP microsquirt ECU which is now included in the price, along with being preprogrammed with a base tune. The harness provided has been expanded to a full plug and play harness requiring no splicing. The necessary oxygen sensor and controller are provided which will need an oxygen sensor bung added to the exhaust. Our headers can be added on which include the bung already installed.
This kit includes:
6ft 6AN hose with straight fittings
(1) 6AN 90 degree fitting
Throttle body injection plate with gaskets
Properly sized injector
EGR delete plate with 1/8 npt hole
3 bar MAP sensor
IAT probe
Wire harness for aftermarket fuel pump that plugs into stock location
Coolant hose adapter
Coolant hose sensor
Longer studs to mount carb
AMP microsquirt ECU Base tune for Tunerstudio
Full wiring harness
Wideband O2 sensor with controller
Related products
Coolant hose kit for Acty
Coolant hose kit for the HA-3/4 trucks from WILLpowered. New silicone hoses can replace the decades old rubber hoses that are leaking, dry rotted or that just look horrible. These come in Blue, Black and Red with an option for a full kit of 8 hoses or a “dress up” kit of the 4 most common and visible hoses.
Although 90% of vans will use all these hoses there are a few models that have one or two different hoses (models with floor heat etc). We would prefer you just don’t buy these for the van version to prevent passive aggressive social media comments.
Honda Acty Suspension Kit P-2
The P2 kit is the ultimate suspension rebuild kit for the Honda Acty at a discounted rate. This kit includes:
2 – Front struts (left and right)
2 – Rear shocks (left and right)
2 – 300 # front springs
4 – Strut rod bushings
These struts and shocks are only available at WILLpowered and slightly pressurized unlike the stock oil filled parts in your 25 year old truck or offered by others.
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.