Fennec – ADAPTI Cup Holder
$79.99
The last cupholder you will ever need!
The Fennec ADAPTI Cup Holder is the last cup holder you will ever need for your 1988 – 1999 Honda ACTY. Utilizing Fennec’s all-new ADAPTI system, the cup holder can be quickly changed with our modular inserts to accommodate many drink sizes, including a specific center slot for smaller, 8oz energy drinks. Never spill your Red Bull on a high speed turn ever again.
We have designed this to provide proper clearance for the driver’s legs, no worries about bumping your drink while driving.
The kit includes all the hardware required for installation as well as 2 inserts, and can be installed in under 5 minutes.
ADAPTI mounts to the ashtray, and requires no additional modifications. You can safely return to a factory ashtray without damaging any components.
ADAPTI works on both the ACTY Truck and Van, as well as vehicle equipped with A/C.
ADAPTI is constructed out of high quality aluminum, and powder coated in a textured black finish.
ADAPTI is proudly designed, manufactured, & assembled in the United States.
| Weight | 0.8 lbs |
|---|---|
| Dimensions | 9 × 6 × 2 in |
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: Fennec
- Vendor: Fennec
- No ratings found yet!
Related products
24 mm coolant connector with a 25 mm lip and 1/8 npt fitting, 68 mm in length
The 24 mm coolant connector by WILLpowered is designed with a 25 mm lip and 1/8 NPT fitting, making it suitable for connecting coolant hoses in car and truck engines. With a length of 68 mm, this connector provides a secure and reliable connection for optimal engine cooling performance. Built to high standards of quality, this product is a durable and essential component for maintaining the engine cooling system in top condition.
AMP’d Microsquirt ECU
The AMP’d MicroSquirt adds higher current capacity injector drivers, higher current capacity on its optioisolated input, and 4 user configurable option switches that activate on-board pullup resistors for applications that use hall or optical style crank and cam sensors. They can also be used to re-purpose digital switch (ALED and WLED) outputs to become logic level ignition outputs for applications that require 3 or 4 ignition outputs without having to solder resistors into the ECU case or wiring.
MicroSquirt is an entry-level, fully assembled ECU with varied applications targeting power sports, single cylinder all the way up to 8 cylinders with up to 2 fuel and 4 spark outputs. Over 40 different ignition modes are supported from mainstream applications like GM LS1, Ford Zetec, Bosch Motronic, and Chrysler Gen III Hemis to unusual modes like Renix Jeep and the Suzuki Swift GTI.
We recommend using the AMP’d MicroSquirt over the regular MicroSquirt for these scenarios:
- When using 6 injectors in the 8-10 ohm range, or 8 or more injectors
- On 6 or 8 cylinder distributorless ignition applications (we make it easy to control these in wasted spark)
- 4 cylinder sequential coil on plug
- Fuel only installations triggered off the negative terminal of an ignition coil
AMP’d MicroSquirt ECU hardware features
Features in bold are added to the AMP’d MicroSquirt.
- 2 high impedance injector outputs – max peak current increased to 19 amps
- 2 dedicated spark outputs
- 2 general purpose on/off outputs – can be repurposed as spark outputs with switchable pull ups
- 1 PWM IAC output – can be repurposed as general purpose output
- 1 dedicated fuel pump output
- 2 variable reluctor conditioned inputs with switchable pull ups
- 1 optoisolated RPM input – max voltage and current increased
- 1 flex fuel or general purpose switched input
- 7 analog inputs
MicroSquirt ECU software features
- Supports speed density, alpha-N (TPS based), or MAF based fuel and spark tables
- 0.66 microsecond injector pulse width resolution
- Allows blending multiple load types, including specialized mode for independent throttle bodies
- Supports a wide variety of OEM cam and crank position sensors
- Accelerator pump or model based acceleration enrichment
- Closed or open loop idle speed and boost control
- On/off nitrous control
- Wankel rotary support: 2 rotor engines with separate leading and trailing spark tables
- Staged injection
- Table switching
- 16 x 16 fuel tables
- 12 x 12 spark tables
- 2 step rev limiter (launch control) with no-lift shifting
- Wideband AFR target table
- Flex fuel sensor input
- Real time barometric correction (external sensor required)
- Sequential shift cut and air shifter control
Honda ACTY HA3/HA4 Performance Intake Kit w/ Upgraded Filter
Complete performance intake kit for the Honda ACTY HA3/HA4 platform, with the added bonus of a lifetime K&N air filter! This is a direct bolt on kit that utilizes a standard 4 inch dry air filter for easy replacement and maximum air volume. This intake kit has been designed with cutting edge software and manufacturing methods to incorporate a velocity funnel for maximum performance when properly utilized.
Honda ACTY HA6 & HA7 Performance Intake w/ Upgraded Filter
Performance air intake for the 1999-2009 Honda ACTY HA6 and HA7 models, with the added bonus of a lifetime K&N air filter! This intake is made from cutting edge materials and 3D printing processes and is a direct bolt on upgrade! A standard, easily replaceable, 4 inch cone filter is used for maximum air flow and ease of maintenance.
The 2-in-1 design allows for maximum performance with minimal audible change in engine noises, or maximum sound out of your Kei truck when mobbing around town. The riot configuration tone is similar to a mid-range exhaust upgrade without the need to change the factory exhaust.
Reviews
There are no reviews yet.