Timing belt replacement sticker
$5.95
Timing belt replacement sticker that uses the same basic format from Japanese Kei trucks. Absorbs ink such as sharpie and will not smudge when wet.
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Related products
Acty Big brake kit
Here it is, a compete big brake kit with everything you need in one kit. Not only have we consolidated all the parts you need but we have been able to reduce the price compared to others considerably. For installation you can watch our YouTube video and don’t forget to put the bleed screw up which means the caliper labeled “R” will go on the left or passenger side and vice versa. This kit includes the following for pre-order with an expected ship date just before Christmas 2024:
(2) Red front calipers w/clips
(4) WILLpowered big brake ceramic pads
(2) Front rotors with black painted hubs
(2) WILLpowered brake spacers
(4) Extended length hex screws for rotors
(8) Extended length studs
Coolant hose kit for Acty
Coolant hose kit for the HA-3/4 trucks from WILLpowered. New silicone hoses can replace the decades old rubber hoses that are leaking, dry rotted or that just look horrible. These come in Blue, Black and Red with an option for a full kit of 8 hoses or a “dress up” kit of the 4 most common and visible hoses.
Although 90% of vans will use all these hoses there are a few models that have one or two different hoses (models with floor heat etc). We would prefer you just don’t buy these for the van version to prevent passive aggressive social media comments.
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.
