6 AN x 6ft black hose with straight fittings
$27.00
6 AN hose 6ft in length black with straight black fittings. PTFE hose suitable for gasoline, ethanol, coolant etc.
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Honda Acty Rear Wheel Bearing Set
Honda Acty rear wheel bearing set with the option to buy to the inner cv trans seals at the same time. Often you will be removing the entire rear cv axle to get to these bearings so it is usually a good idea to have the trans seals on hand incase they get damaged while doing the job. Each wheel has 2 bearings, one on the inner and one on the outer.
WILLpowered Honda Acty Strut Rod Bushing
These strut rod bushings for the Honda Acty were developed in house for a softer setup than the typical Moog bushings. The softness is closer to stock so you will eliminate steering wheel shake and strut rod slap but the ride will be softer overall. These allow some flex but unless you are going for a full race suspension setup these probably better suit your needs. An alignment following installation is HIGHLY recommended even if you are driving with a big smile and no more steering shakes.
Honda Acty Transmission Case Seals
These are the seals for the cv axles where they enter the transmission. This is for both the left and the right seals for HA-1/2/3/4 as well as vans HH-1/2/3/4. If you need only one seal let us know but if one is bad, the other is surely on its way.
Note: the Acty Attack models have a different size seal on the passenger side to support the locking diff – these DO NOT fit the Attack model passenger side.
Honda Acty Distributor rebuild kit
Seal Kit for Honda Acty Distributors Ha-3/4 and HH-3/4. This kit includes the o-rings for the distributor collar as well as the oil seal that sits at the bottom of the distributor. If your distributor is leaking on the drivers side of the engine, as well as any oil inside the distributor these are the seals you need.
