EFI kit for Acty MKI
Price range: $1,000.00 through $1,400.00
Front Struts for 3rd Gen Acty
$400.00
These pressurized struts fit the third generation Acty trucks, vans and the Vamos van. It should be 1999 and up fuel injected models but if you are unsure please reach out to us before purchasing. Your old struts can be tired or just plain failed after so many years. These pair well with our 300# springs and can restore the ride to a stock feel. Sold as a pair
Shipping
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
Honda Acty Front Strut
Honda Acty front struts for HA-3, HA-4, HH-3, HH-4. Your struts may be bad if during the stroke the rod jumps vice a smooth movement throughout. Leaking oil will also be a tell tale sign yours are bad.
New struts for Honda Acty trucks and vans. These are slightly pressurized and will fully extend on their own. Stock struts are only oil filled and don’t extend so these will provide more damping.
Regardless of what you find on the internet 51606-SJ7-014 will be on the right hand side (drivers side) while the 51605-SJ7-014 will be the left or passenger side.
Acty Exhaust Header
Here it is, the WILLpowered exhaust header for the Honda Acty EO7A 660cc engines. This will work for both trucks and vans. Dyno tested for 1-2 hp if the only modification performed but more can be expected if you had a clogged catalytic converter. If this is the only exhaust modification you do the exhaust sound is slightly more throaty without really being any louder.
Comes with new gaskets for both ends
Deletes catalytic converter
Bolts to stock locations
Off-road use only
Honda Acty Engine Mount kit
Honda Acty engine mount kit for HA-3/4 and HH-3/4. Part numbers:
50820-SJ6-030
50810-SJ6-030
50805-SJ7-050
Please verify the part numbers are what you need for your vehicle and a manual transmission. If you are unsure please call before purchasing. Reduce engine vibration and noise be restoring your engine mounts to their factory new condition. We are offering these engine mounts as a pre-order and for the cheapest we will ever offer them. Expected shipping date is mid September 2026.
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
Honda Acty Magnetic Oil Plug
WILLpowered magnetic drain plug for the Honda Acty. Collect that ferrous material in between oil changes and some that has been having out for 25 years. Comes with a new crush washer and a 14mm wrench head.
Tighten till snug. One customer reported a plug breaking at 30ftlbs of torque, if using a torque wrench it should be below that.
May fit other brands but we have not confirmed which ones yet.
Related products
Honda Acty Front Brake Rotors
Replace those rusty 25 year old rotors with these new ones. Fits all HA-3/4 trucks and HH-3/4 vans, sold in pairs (price is for 2 front rotors). The current batch of solid rotors ONLY has the holes for the mounting screw slightly misaligned. This means that the rotor will fit and work as it should but will ultimately be held on by just the rim and lugnuts (just like some other stock setups).
Cross Drilled rotors are designed for maximum efficiency under braking and look amazing while doing so. Mounting holes for Cross Drilled Rotors are 100% correct.
Honda Acty Fuel Filter
Your fuel filter is probably 25 years old and allowing gunk into your carb stealing those precious few horsepower. Get this new filter installed not just for piece of mind but to keep you lines running clean.
*****UPDATE*****
After complaints we have switched suppliers so that the filter has the correct size nipple. Previous filters we sold (and others sell) have plastic nipples larger than stock and can make it almost impossible to get the fuel lines back on. 25 year old dried out rubber makes the issue even worse. From now on we will only sell the filters that are the correct size even if we have to charge a few dollars more.
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
