Acty van and Street rear mud flap
$290.00
This is a rear mudflap designed for the HH-3/4 Acty vans and Streets. This may work with a truck with modification as well. Made in house with 3D printed mounts and Honda label and ABS plastic for the flap that won’t curl in the future like the rubber versions.
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
Honda Acty Front Strut
Honda Acty front struts for HA-3, HA-4, HH-3, HH-4. Your struts may be bad if during the stroke the rod jumps vice a smooth movement throughout. Leaking oil will also be a tell tale sign yours are bad.
New struts for Honda Acty trucks and vans. These are slightly pressurized and will fully extend on their own. Stock struts are only oil filled and don’t extend so these will provide more damping.
Regardless of what you find on the internet 51606-SJ7-014 will be on the right hand side (drivers side) while the 51605-SJ7-014 will be the left or passenger side.
Honda Acty Stage 1-M
Here is our Honda Acty Stage 1-M(Maintenance) kit! Buy all your filters at the same time and save money. Our famous WILLpowered magnetic drain plug is also half off if you purchase it with the kit. This kit is for anyone doing basic maintenance but targeted to those picking up their trucks at the port for the first time. All parts fit HA-1/2/3/4 and vans HH-1/2/3/4.
Kit includes:
(1) WILLpowered Acty air filter (carb models only)
(1) Honda oil filter
(1) Acty fuel filter (with correct size nipples)
(1) WILLpowered magnetic drain plug (optional)
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
Honda Acty Rear Wheel Bearing Set
Honda Acty rear wheel bearing set with the option to buy to the inner cv trans seals at the same time. Often you will be removing the entire rear cv axle to get to these bearings so it is usually a good idea to have the trans seals on hand incase they get damaged while doing the job. Each wheel has 2 bearings, one on the inner and one on the outer.
Related products
Acty Big brake kit
Here it is, a compete big brake kit with everything you need in one kit. Not only have we consolidated all the parts you need but we have been able to reduce the price compared to others considerably. For installation you can watch our YouTube video and don’t forget to put the bleed screw up which means the caliper labeled “R” will go on the left or passenger side and vice versa. This kit includes the following for pre-order with an expected ship date just before Christmas 2024:
(2) Red front calipers w/clips
(4) WILLpowered big brake ceramic pads
(2) Front rotors with black painted hubs
(2) WILLpowered brake spacers
(4) Extended length hex screws for rotors
(8) Extended length studs
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.