Honda Acty Piston Rings
$165.00
Honda Acty piston ring set. Comes with 3 sets of rings that fit all E07A/E07Z pistons.
| option | E07A, EH, TN360 |
|---|
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Honda Acty Shift Bushing Kit
This is a custom made and sourced shift bushing kit for the Honda Acty/Street HA3/4 and HH3/4. Most of the play experienced in the old shifters is from the cup bushing, which is no longer produced. We have developed a replacement bushing and now offer it as a full shift bushing replacement kit. The full kit includes the cup bushing, six flange bushings, five thrust washers to replace the stock parts and use as shims (if necessary), two sleeve bushings, two cotter pins and grease. These kits will also fit the attack trim level and replaces all bushings in that model. Base bushings are now included as standard. Installation video is on our Willpowered YouTube channel.
BASE BUSHINGS ARE INCLUDED!!!
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit.
Honda Acty Front Strut
Honda Acty front struts for HA-3, HA-4, HH-3, HH-4. Your struts may be bad if during the stroke the rod jumps vice a smooth movement throughout. Leaking oil will also be a tell tale sign yours are bad.
New struts for Honda Acty trucks and vans. These are slightly pressurized and will fully extend on their own. Stock struts are only oil filled and don’t extend so these will provide more damping.
Regardless of what you find on the internet 51606-SJ7-014 will be on the right hand side (drivers side) while the 51605-SJ7-014 will be the left or passenger side.
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
24 mm coolant connector with a 25 mm lip and 1/8 npt fitting, 68 mm in length
The 24 mm coolant connector by WILLpowered is designed with a 25 mm lip and 1/8 NPT fitting, making it suitable for connecting coolant hoses in car and truck engines. With a length of 68 mm, this connector provides a secure and reliable connection for optimal engine cooling performance. Built to high standards of quality, this product is a durable and essential component for maintaining the engine cooling system in top condition.
Related products
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
