Honda Acty Radiator Cap All Models
$20.00
Located under a cover in front of the passenger seat your rad cap could be dried out and leaking. This new radiator cap can replace your worn out 25 year old cap.
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Honda Acty Stage 1-M
Here is our Honda Acty Stage 1-M(Maintenance) kit! Buy all your filters at the same time and save money. Our famous WILLpowered magnetic drain plug is also half off if you purchase it with the kit. This kit is for anyone doing basic maintenance but targeted to those picking up their trucks at the port for the first time. All parts fit HA-1/2/3/4 and vans HH-1/2/3/4.
Kit includes:
(1) WILLpowered Acty air filter (carb models only)
(1) Honda oil filter
(1) Acty fuel filter (with correct size nipples)
(1) WILLpowered magnetic drain plug (optional)
Honda Acty Tensioner Idler and Timing Belt
Acty MPH conversion overlays
If you are happy with the glow of your stock gauges or just like the original look this option might be for you. Designed to look exactly like the stock speedometer these solid overlays will update your speed to mph with relative accuracy.
NOT a sticker
Related products
Acty Exhaust Header
Here it is, the WILLpowered exhaust header for the Honda Acty EO7A 660cc engines. This will work for both trucks and vans. Dyno tested for 1-2 hp if the only modification performed but more can be expected if you had a clogged catalytic converter. If this is the only exhaust modification you do the exhaust sound is slightly more throaty without really being any louder.
Comes with new gaskets for both ends
Deletes catalytic converter
Bolts to stock locations
Off-road use only
Honda Acty Front Brake Rotors
Replace those rusty 25 year old rotors with these new ones. Fits all HA-3/4 trucks and HH-3/4 vans, sold in pairs (price is for 2 front rotors). The current batch of solid rotors ONLY has the holes for the mounting screw slightly misaligned. This means that the rotor will fit and work as it should but will ultimately be held on by just the rim and lugnuts (just like some other stock setups).
Cross Drilled rotors are designed for maximum efficiency under braking and look amazing while doing so. Mounting holes for Cross Drilled Rotors are 100% correct.
Honda Acty Fuel Filter
Your fuel filter is probably 25 years old and allowing gunk into your carb stealing those precious few horsepower. Get this new filter installed not just for piece of mind but to keep you lines running clean.
*****UPDATE*****
After complaints we have switched suppliers so that the filter has the correct size nipple. Previous filters we sold (and others sell) have plastic nipples larger than stock and can make it almost impossible to get the fuel lines back on. 25 year old dried out rubber makes the issue even worse. From now on we will only sell the filters that are the correct size even if we have to charge a few dollars more.
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
