Honda Acty Air Filter
$35.00
Honda Acty air filter. Fits all HA-1/2/3/4 trucks and Street HH-1/2/3/4 vans.
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Honda Acty Front Brake Rotors
Replace those rusty 25 year old rotors with these new ones. Fits all HA-3/4 trucks and HH-3/4 vans, sold in pairs (price is for 2 front rotors). The current batch of solid rotors ONLY has the holes for the mounting screw slightly misaligned. This means that the rotor will fit and work as it should but will ultimately be held on by just the rim and lugnuts (just like some other stock setups).
Cross Drilled rotors are designed for maximum efficiency under braking and look amazing while doing so. Mounting holes for Cross Drilled Rotors are 100% correct.
Honda Acty Fuel Filter
Your fuel filter is probably 25 years old and allowing gunk into your carb stealing those precious few horsepower. Get this new filter installed not just for piece of mind but to keep you lines running clean.
*****UPDATE*****
After complaints we have switched suppliers so that the filter has the correct size nipple. Previous filters we sold (and others sell) have plastic nipples larger than stock and can make it almost impossible to get the fuel lines back on. 25 year old dried out rubber makes the issue even worse. From now on we will only sell the filters that are the correct size even if we have to charge a few dollars more.
Honda Acty Rear Wheel Bearing Set
Honda Acty rear wheel bearing set with the option to buy to the inner cv trans seals at the same time. Often you will be removing the entire rear cv axle to get to these bearings so it is usually a good idea to have the trans seals on hand incase they get damaged while doing the job. Each wheel has 2 bearings, one on the inner and one on the outer.
Related products
Acty Big brake kit
Here it is, a compete big brake kit with everything you need in one kit. Not only have we consolidated all the parts you need but we have been able to reduce the price compared to others considerably. For installation you can watch our YouTube video and don’t forget to put the bleed screw up which means the caliper labeled “R” will go on the left or passenger side and vice versa. This kit includes the following for pre-order with an expected ship date just before Christmas 2024:
(2) Red front calipers w/clips
(4) WILLpowered big brake ceramic pads
(2) Front rotors with black painted hubs
(2) WILLpowered brake spacers
(4) Extended length hex screws for rotors
(8) Extended length studs
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
