WILLpowered logo sticker
$2.00
Show your support with a WILLpowered Sticker
Shipping
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
Honda Acty Stage 1-M
Here is our Honda Acty Stage 1-M(Maintenance) kit! Buy all your filters at the same time and save money. Our famous WILLpowered magnetic drain plug is also half off if you purchase it with the kit. This kit is for anyone doing basic maintenance but targeted to those picking up their trucks at the port for the first time. All parts fit HA-1/2/3/4 and vans HH-1/2/3/4.
Kit includes:
(1) WILLpowered Acty air filter (carb models only)
(1) Honda oil filter
(1) Acty fuel filter (with correct size nipples)
(1) WILLpowered magnetic drain plug (optional)
Select options
This product has multiple variants. The options may be chosen on the product page
Honda Acty Rear Wheel Bearing Set
Honda Acty rear wheel bearing set with the option to buy to the inner cv trans seals at the same time. Often you will be removing the entire rear cv axle to get to these bearings so it is usually a good idea to have the trans seals on hand incase they get damaged while doing the job. Each wheel has 2 bearings, one on the inner and one on the outer.
Select options
This product has multiple variants. The options may be chosen on the product page
Honda Acty Custom Leather Shift Boot
If you are looking for a custom look for your interior or if your rubber boot tabs are ripped this custom leather shift boot made specifically for the Acty is for you. The boot comes with a custom bracket to attach it to the interior plastic molding. If your center console has several broken plastic slits this may not work well for your application.
Made with real leather this custom boot is made by us in the USA and currently comes in black with Red, Blue or Gray stitching.
Select options
This product has multiple variants. The options may be chosen on the product page
Timing belt replacement sticker
Related products
24 mm coolant connector with a 25 mm lip and 1/8 npt fitting, 68 mm in length
The 24 mm coolant connector by WILLpowered is designed with a 25 mm lip and 1/8 NPT fitting, making it suitable for connecting coolant hoses in car and truck engines. With a length of 68 mm, this connector provides a secure and reliable connection for optimal engine cooling performance. Built to high standards of quality, this product is a durable and essential component for maintaining the engine cooling system in top condition.
Honda Acty Front Brake Rotors
Replace those rusty 25 year old rotors with these new ones. Fits all HA-3/4 trucks and HH-3/4 vans, sold in pairs (price is for 2 front rotors). The current batch of solid rotors ONLY has the holes for the mounting screw slightly misaligned. This means that the rotor will fit and work as it should but will ultimately be held on by just the rim and lugnuts (just like some other stock setups).
Cross Drilled rotors are designed for maximum efficiency under braking and look amazing while doing so. Mounting holes for Cross Drilled Rotors are 100% correct.
Honda Acty pillar pod trim
Almost two years in the making, our Ronin Werks team has been working behind the scenes to develop these Acty pillar pod trims. We scanned real Honda trim that had been molded with pods to ensure an exact fit into your truck/van. Next, injection molding was the solution to get the quality and durability we insist on. The molding process creates a 95% finished product so customers may wish to paint, texture or trim the piece prior to final installation. We chose to keep the divers side a solid piece to maintain a finished look. To install the handle holes will need to be added prior to installation.
Honda Acty Shift Bushing Kit
This is a custom made and sourced shift bushing kit for the Honda Acty/Street HA3/4 and HH3/4. Most of the play experienced in the old shifters is from the cup bushing, which is no longer produced. We have developed a replacement bushing and now offer it as a full shift bushing replacement kit. The full kit includes the cup bushing, six flange bushings, five thrust washers to replace the stock parts and use as shims (if necessary), two sleeve bushings, two cotter pins and grease. These kits will also fit the attack trim level and replaces all bushings in that model. Base bushings are now included as standard. Installation video is on our Willpowered YouTube channel.
BASE BUSHINGS ARE INCLUDED!!!
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit.
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
Honda Acty Suspension Kit P-2
The P2 kit is the ultimate suspension rebuild kit for the Honda Acty at a discounted rate. This kit includes:
2 – Front struts (left and right)
2 – Rear shocks (left and right)
2 – 300 # front springs
4 – Strut rod bushings
These struts and shocks are only available at WILLpowered and slightly pressurized unlike the stock oil filled parts in your 25 year old truck or offered by others.
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
