Honda Acty Custom Leather Shift Boot
$100.00
If you are looking for a custom look for your interior or if your rubber boot tabs are ripped this custom leather shift boot made specifically for the Acty is for you. The boot comes with a custom bracket to attach it to the interior plastic molding. If your center console has several broken plastic slits this may not work well for your application.
Made with real leather this custom boot is made by us in the USA and currently comes in black with Red, Blue or Gray stitching.
| color | Blue, Gray, Red |
|---|
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Acty MPH conversion overlays
Honda Acty Engine Mount kit
Honda Acty engine mount kit for HA-3/4 and HH-3/4. Part numbers:
50820-SJ6-030
50810-SJ6-030
50805-SJ7-050
Please verify the part numbers are what you need for your vehicle and a manual transmission. If you are unsure please call before purchasing. Reduce engine vibration and noise be restoring your engine mounts to their factory new condition. We are offering these engine mounts as a pre-order and for the cheapest we will ever offer them. Expected shipping date is mid September 2026.
Related products
Honda Acty Shift Bushing Kit
This is a custom made and sourced shift bushing kit for the Honda Acty/Street HA3/4 and HH3/4. Most of the play experienced in the old shifters is from the cup bushing, which is no longer produced. We have developed a replacement bushing and now offer it as a full shift bushing replacement kit. The full kit includes the cup bushing, six flange bushings, five thrust washers to replace the stock parts and use as shims (if necessary), two sleeve bushings, two cotter pins and grease. These kits will also fit the attack trim level and replaces all bushings in that model. Base bushings are now included as standard. Installation video is on our Willpowered YouTube channel.
BASE BUSHINGS ARE INCLUDED!!!
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit.
Honda Acty Suspension Kit P-2
The P2 kit is the ultimate suspension rebuild kit for the Honda Acty at a discounted rate. This kit includes:
2 – Front struts (left and right)
2 – Rear shocks (left and right)
2 – 300 # front springs
4 – Strut rod bushings
These struts and shocks are only available at WILLpowered and slightly pressurized unlike the stock oil filled parts in your 25 year old truck or offered by others.
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.