Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Honda Acty Rear Shocks
Honda Acty rear shocks. You know if you need them! easy install but a world of difference. Check our WILLpowered YouTube page for a quick tutorial on how to change these out. These are our new rear shocks which are actually pressurized as opposed to the stock ones which are not (we have a video showing the difference). While they are a great replacement for stock because of the slight added stiffness they also pair well with our front springs.
Price is for both rear shocks!
fit HA-1/2/3/4/5/6/7, HH-1/2/3/4/6/7
Cheap Acty Spark Plug Wires
These wires are the ones we were using previously that MAY RIP DURING REMOVAL!!!!!!! This is why they are $5. They work great installed and if you are careful while removing and pull from the black fitting they probably won’t rip, but you’ve been warned. For $5 it might be best just to get two sets. Honda Acty spark plug wires in red for HA-1/2/3/4 and HH-1/2/3/4. Our other sets are stronger and don’t rip but are more expensive.
Honda Acty Intake Valve 14711-pn4-000
Honda Acty Timing Belt Tensioner
Honda Acty Idler Bearing
Related products
Acty van and Street rear mud flap
Honda Acty Fuel Filter
Your fuel filter is probably 25 years old and allowing gunk into your carb stealing those precious few horsepower. Get this new filter installed not just for piece of mind but to keep you lines running clean.
*****UPDATE*****
After complaints we have switched suppliers so that the filter has the correct size nipple. Previous filters we sold (and others sell) have plastic nipples larger than stock and can make it almost impossible to get the fuel lines back on. 25 year old dried out rubber makes the issue even worse. From now on we will only sell the filters that are the correct size even if we have to charge a few dollars more.
Honda Acty Intake Valve 14711-pn4-000
Honda Acty Shift Bushing Kit
This is a custom made and sourced shift bushing kit for the Honda Acty/Street HA3/4 and HH3/4. Most of the play experienced in the old shifters is from the cup bushing, which is no longer produced. We have developed a replacement bushing and now offer it as a full shift bushing replacement kit. The full kit includes the cup bushing, six flange bushings, five thrust washers to replace the stock parts and use as shims (if necessary), two sleeve bushings, two cotter pins and grease. These kits will also fit the attack trim level and replaces all bushings in that model. Base bushings are now included as standard. Installation video is on our Willpowered YouTube channel.
BASE BUSHINGS ARE INCLUDED!!!
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit.
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
Honda Acty Suspension Kit P-2
The P2 kit is the ultimate suspension rebuild kit for the Honda Acty at a discounted rate. This kit includes:
2 – Front struts (left and right)
2 – Rear shocks (left and right)
2 – 300 # front springs
4 – Strut rod bushings
These struts and shocks are only available at WILLpowered and slightly pressurized unlike the stock oil filled parts in your 25 year old truck or offered by others.
