Honda Acty Thrust Washer Set EH
$75.00
Shipping
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
Willpowered Alternator for Honda Acty
If your alternator is under performing or has completely died then this product is for you. OEM alternators can be expensive and we have seen used ones(not even rebuilt) for over $200. These alternators have a 60A output which is the stock size for most of the trucks/vans.
We have custom uprated some alternators to 100A output (56A bench tested stock) if you have the need, please contact us directly to discuss because most people don’t need them. Uprated are currently being built and can be pre-ordered with about 2-3 week lead time.
These NOW FIT trucks WITH AC!!!!
Select options
This product has multiple variants. The options may be chosen on the product page
Acty Brake Kit
Save even more on your Acty brakes when you buy our WILLpowered full brake kit. This kit includes everything you need to refresh your front and rear brakes in any HA-1/2/3/4 truck or HH-1/2/3/4 van. These work 100% as they should but the hole for the mounting screw is slightly off for ONLY the solid rotors. For this reason this batch of rotors and brake kits are discounted and sold AS-IS.
Cross drilled and slotted rotors fit 100% as intended and all holes align for mounting screws.
Kit includes:
(2) front rotors
(1) set of WILLpowered ceramic front brake pads
(1) set of rear brake pads
Select options
This product has multiple variants. The options may be chosen on the product page
Related products
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
Titanium wheel studs for Honda
Titanium wheel studs that fit Honda branded vehicles but specifically designed for the Acty and Street. Lighter and stronger than our previous extended wheel studs they can be a unique addition to your vehicle. Laser etched with the Ryoku Kanji to symbolize the added strength.
Highly recommend using a wheel stud installer while installing otherwise you may damage whatever lugnut etc you are using for install.
