Honda Acty Bushings for Shifter Base
$10.00
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit. These will fit all HA1-4 and HH1-4 trucks and vans.
If you are ordering our shift kit you DO NOT need these as they are included in the kit.
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Acty Brake Kit
Save even more on your Acty brakes when you buy our WILLpowered full brake kit. This kit includes everything you need to refresh your front and rear brakes in any HA-1/2/3/4 truck or HH-1/2/3/4 van. These work 100% as they should but the hole for the mounting screw is slightly off for ONLY the solid rotors. For this reason this batch of rotors and brake kits are discounted and sold AS-IS.
Cross drilled and slotted rotors fit 100% as intended and all holes align for mounting screws.
Kit includes:
(2) front rotors
(1) set of WILLpowered ceramic front brake pads
(1) set of rear brake pads
Related products
Coolant hose kit for Acty
Coolant hose kit for the HA-3/4 trucks from WILLpowered. New silicone hoses can replace the decades old rubber hoses that are leaking, dry rotted or that just look horrible. These come in Blue, Black and Red with an option for a full kit of 8 hoses or a “dress up” kit of the 4 most common and visible hoses.
Although 90% of vans will use all these hoses there are a few models that have one or two different hoses (models with floor heat etc). We would prefer you just don’t buy these for the van version to prevent passive aggressive social media comments.
Honda Acty Front Brake Rotors
Replace those rusty 25 year old rotors with these new ones. Fits all HA-3/4 trucks and HH-3/4 vans, sold in pairs (price is for 2 front rotors). The current batch of solid rotors ONLY has the holes for the mounting screw slightly misaligned. This means that the rotor will fit and work as it should but will ultimately be held on by just the rim and lugnuts (just like some other stock setups).
Cross Drilled rotors are designed for maximum efficiency under braking and look amazing while doing so. Mounting holes for Cross Drilled Rotors are 100% correct.
Honda Acty pillar pod trim
Almost two years in the making, our Ronin Werks team has been working behind the scenes to develop these Acty pillar pod trims. We scanned real Honda trim that had been molded with pods to ensure an exact fit into your truck/van. Next, injection molding was the solution to get the quality and durability we insist on. The molding process creates a 95% finished product so customers may wish to paint, texture or trim the piece prior to final installation. We chose to keep the divers side a solid piece to maintain a finished look. To install the handle holes will need to be added prior to installation.
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.