Honda Acty Custom Floor Mats
$259.95
Set of (2) black custom floor mats for both driver and passenger sides. High quality carpeting was used with custom Acty embroidery on the drivers side sill panel. We offer fitments for both trucks with AC and without AC. These will also fit Acty/Street vans but will not include any mat for the rear.
| option | With Ac, Without Ac |
|---|
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Honda Acty Rear Wheel Bearing Set
Honda Acty rear wheel bearing set with the option to buy to the inner cv trans seals at the same time. Often you will be removing the entire rear cv axle to get to these bearings so it is usually a good idea to have the trans seals on hand incase they get damaged while doing the job. Each wheel has 2 bearings, one on the inner and one on the outer.
Honda Acty Front Wheel Bearing
Honda Acty Front Brake Rotors
Replace those rusty 25 year old rotors with these new ones. Fits all HA-3/4 trucks and HH-3/4 vans, sold in pairs (price is for 2 front rotors). The current batch of solid rotors ONLY has the holes for the mounting screw slightly misaligned. This means that the rotor will fit and work as it should but will ultimately be held on by just the rim and lugnuts (just like some other stock setups).
Cross Drilled rotors are designed for maximum efficiency under braking and look amazing while doing so. Mounting holes for Cross Drilled Rotors are 100% correct.
Honda Acty Wiring Harness For Aftermarket Stereo
These connectors are for Honda Acty trucks and Acty Vans(Street) with the 4 pin/2 pin, 4 pin/4 pin, 6 pin/4 pin or the 16 pin connectors. The 1990-1993 Acty trucks should be the 4/2 pin and 1994 and up should be the 4/4 pin. A 6 pin/4 pin connector is now supported and is usually connected to a clarion headunit, verify before ordering. Most Acty Vans (Street) will be the newly added 16pin. BE SURE TO VERIFY YOUR CONNECTIONS and select the correct size on check out. These connectors plug directly into your stock Acty harness and have 6″ of wiring that you can then splice/solder to the harness that comes with your aftermarket stereo.
Related products
24 mm coolant connector with a 25 mm lip and 1/8 npt fitting, 68 mm in length
The 24 mm coolant connector by WILLpowered is designed with a 25 mm lip and 1/8 NPT fitting, making it suitable for connecting coolant hoses in car and truck engines. With a length of 68 mm, this connector provides a secure and reliable connection for optimal engine cooling performance. Built to high standards of quality, this product is a durable and essential component for maintaining the engine cooling system in top condition.
Honda Acty Muddy Max 2″ Lift Kit
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
