Honda Acty Stage 1-M
Price range: $57.00 through $65.00
Honda Acty Wiring Harness For Aftermarket Stereo
$25.00
These connectors are for Honda Acty trucks and Acty Vans(Street) with the 4 pin/2 pin, 4 pin/4 pin, 6 pin/4 pin or the 16 pin connectors. The 1990-1993 Acty trucks should be the 4/2 pin and 1994 and up should be the 4/4 pin. A 6 pin/4 pin connector is now supported and is usually connected to a clarion headunit, verify before ordering. Most Acty Vans (Street) will be the newly added 16pin. BE SURE TO VERIFY YOUR CONNECTIONS and select the correct size on check out. These connectors plug directly into your stock Acty harness and have 6″ of wiring that you can then splice/solder to the harness that comes with your aftermarket stereo.
Shipping
Additional information
| option |
16 Pin ,4/2 Pin ,4/4 Pin ,6/4 Pin |
|---|
Shipping & Delivery
Vendor Info
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
More Products
Honda Acty Idler Bearing
Willpowered Alternator for Honda Acty
If your alternator is under performing or has completely died then this product is for you. OEM alternators can be expensive and we have seen used ones(not even rebuilt) for over $200. These alternators have a 60A output which is the stock size for most of the trucks/vans.
We have custom uprated some alternators to 100A output (56A bench tested stock) if you have the need, please contact us directly to discuss because most people don’t need them. Uprated are currently being built and can be pre-ordered with about 2-3 week lead time.
These NOW FIT trucks WITH AC!!!!
Select options
This product has multiple variants. The options may be chosen on the product page
Honda Acty Carb Rebuild Kit
If you are having issues with your carburetor and low on power, we always recommend a deep clean of the carburetor as the first step. This kit has the seals and gaskets you need to make sure your carb is sealed back up and running. Other issues can be the solenoids found in our other product listings.
Honda Acty Strut Rod Bushing
Just added is our strut rod bushings for the Honda Acty. Do you have a steering wheel shake that you have been unable to track down? Does your steering/suspension make that horrible slap sound when going over small bumps? Your stock bushings could be the issue and these will fix it. An alignment following installation is HIGHLY recommended even if you are driving with a big smile and no more steering shakes. Color my vary
Related products
Acty Exhaust Header
Here it is, the WILLpowered exhaust header for the Honda Acty EO7A 660cc engines. This will work for both trucks and vans. Dyno tested for 1-2 hp if the only modification performed but more can be expected if you had a clogged catalytic converter. If this is the only exhaust modification you do the exhaust sound is slightly more throaty without really being any louder.
Comes with new gaskets for both ends
Deletes catalytic converter
Bolts to stock locations
Off-road use only
AMP’d Microsquirt ECU
The AMP’d MicroSquirt adds higher current capacity injector drivers, higher current capacity on its optioisolated input, and 4 user configurable option switches that activate on-board pullup resistors for applications that use hall or optical style crank and cam sensors. They can also be used to re-purpose digital switch (ALED and WLED) outputs to become logic level ignition outputs for applications that require 3 or 4 ignition outputs without having to solder resistors into the ECU case or wiring.
MicroSquirt is an entry-level, fully assembled ECU with varied applications targeting power sports, single cylinder all the way up to 8 cylinders with up to 2 fuel and 4 spark outputs. Over 40 different ignition modes are supported from mainstream applications like GM LS1, Ford Zetec, Bosch Motronic, and Chrysler Gen III Hemis to unusual modes like Renix Jeep and the Suzuki Swift GTI.
We recommend using the AMP’d MicroSquirt over the regular MicroSquirt for these scenarios:
- When using 6 injectors in the 8-10 ohm range, or 8 or more injectors
- On 6 or 8 cylinder distributorless ignition applications (we make it easy to control these in wasted spark)
- 4 cylinder sequential coil on plug
- Fuel only installations triggered off the negative terminal of an ignition coil
- 2 high impedance injector outputs – max peak current increased to 19 amps
- 2 dedicated spark outputs
- 2 general purpose on/off outputs – can be repurposed as spark outputs with switchable pull ups
- 1 PWM IAC output – can be repurposed as general purpose output
- 1 dedicated fuel pump output
- 2 variable reluctor conditioned inputs with switchable pull ups
- 1 optoisolated RPM input – max voltage and current increased
- 1 flex fuel or general purpose switched input
- 7 analog inputs
- Supports speed density, alpha-N (TPS based), or MAF based fuel and spark tables
- 0.66 microsecond injector pulse width resolution
- Allows blending multiple load types, including specialized mode for independent throttle bodies
- Supports a wide variety of OEM cam and crank position sensors
- Accelerator pump or model based acceleration enrichment
- Closed or open loop idle speed and boost control
- On/off nitrous control
- Wankel rotary support: 2 rotor engines with separate leading and trailing spark tables
- Staged injection
- Table switching
- 16 x 16 fuel tables
- 12 x 12 spark tables
- 2 step rev limiter (launch control) with no-lift shifting
- Wideband AFR target table
- Flex fuel sensor input
- Real time barometric correction (external sensor required)
- Sequential shift cut and air shifter control
Coolant hose kit for Acty
Coolant hose kit for the HA-3/4 trucks from WILLpowered. New silicone hoses can replace the decades old rubber hoses that are leaking, dry rotted or that just look horrible. These come in Blue, Black and Red with an option for a full kit of 8 hoses or a “dress up” kit of the 4 most common and visible hoses.
Although 90% of vans will use all these hoses there are a few models that have one or two different hoses (models with floor heat etc). We would prefer you just don’t buy these for the van version to prevent passive aggressive social media comments.
Honda Acty Shift Bushing Kit
This is a custom made and sourced shift bushing kit for the Honda Acty/Street HA3/4 and HH3/4. Most of the play experienced in the old shifters is from the cup bushing, which is no longer produced. We have developed a replacement bushing and now offer it as a full shift bushing replacement kit. The full kit includes the cup bushing, six flange bushings, five thrust washers to replace the stock parts and use as shims (if necessary), two sleeve bushings, two cotter pins and grease. These kits will also fit the attack trim level and replaces all bushings in that model. Base bushings are now included as standard. Installation video is on our Willpowered YouTube channel.
BASE BUSHINGS ARE INCLUDED!!!
Just added is our shifter base bushings! Adding these thicker stiffer custom bushings to the base of your shifter still allows it to flex but stiffens it up for that crisper feel. Adds one minute to installation when performed with the shift kit.
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
