Mini Truck Front Heavy Duty Coil Spring Set 300lbs
$249.00
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
Honda Acty Thermo Radiator Switch
Honda Acty Distributor rebuild kit
Seal Kit for Honda Acty Distributors Ha-3/4 and HH-3/4. This kit includes the o-rings for the distributor collar as well as the oil seal that sits at the bottom of the distributor. If your distributor is leaking on the drivers side of the engine, as well as any oil inside the distributor these are the seals you need.
WILLpowered Honda Acty Strut Rod Bushing
These strut rod bushings for the Honda Acty were developed in house for a softer setup than the typical Moog bushings. The softness is closer to stock so you will eliminate steering wheel shake and strut rod slap but the ride will be softer overall. These allow some flex but unless you are going for a full race suspension setup these probably better suit your needs. An alignment following installation is HIGHLY recommended even if you are driving with a big smile and no more steering shakes.
Heavy Duty Coil Spring Set 300lbs
These are 300# springs that work best on a Honda Acty due to how the Unibody distributes it’s weight. You should get about 3/4 to 1 inch lift in the front that removes the stock rake, provides a little more room for larger tires and provide a much better feel. Although “stiffer” when hitting those driveway curbs etc you don’t get that bottom out feel like you do with stock. A simple and fairly inexpensive modification that you will appreciate every time you drive your truck.
Acty Brake Kit
Save even more on your Acty brakes when you buy our WILLpowered full brake kit. This kit includes everything you need to refresh your front and rear brakes in any HA-1/2/3/4 truck or HH-1/2/3/4 van. These work 100% as they should but the hole for the mounting screw is slightly off for ONLY the solid rotors. For this reason this batch of rotors and brake kits are discounted and sold AS-IS.
Cross drilled and slotted rotors fit 100% as intended and all holes align for mounting screws.
Kit includes:
(2) front rotors
(1) set of WILLpowered ceramic front brake pads
(1) set of rear brake pads
