Honda Acty Cup Holder
$34.95
Honda Acty custom cupholder that we at WILLpowered designed, 3D printed and use in our own shop Acty. Bolts to the front of the ashtray so that it is secure on those trail roads.
Vendor Information
- Store Name: WILLpowered
- Vendor: WILLpowered
- No ratings found yet!
WILLpowered glow face for Honda Acty
WILLpowered glow face gauges for the Honda Acty trucks and vans. These are overlays that attach with the same screws from the stock face. The gauges are set to MPH so you no longer have to convert the kmh while driving. Some twist in the face can be made to truly calibrate the speed after install but on our first try we had it within 1-2 mph and left it as is. For the tachometer face the temp and gas gauges are not lit but come with an adhesive backed piece for a matched look.
We have a new version called “No Tachometer Rounded” which is if your gas and temp gauges have rounded edges instead of a more straight down appearance. Please see pictures or call if you are not sure.
Please choose if you have a tachometer cluster or not. These will be plug and play using the dash clock harness so that the gauges will light up with your headlights. The harness will be slightly different if you have a clock already plugged in so please select if you do or don’t.
Honda Acty Wiring Harness For Aftermarket Stereo
These connectors are for Honda Acty trucks and Acty Vans(Street) with the 4 pin/2 pin, 4 pin/4 pin, 6 pin/4 pin or the 16 pin connectors. The 1990-1993 Acty trucks should be the 4/2 pin and 1994 and up should be the 4/4 pin. A 6 pin/4 pin connector is now supported and is usually connected to a clarion headunit, verify before ordering. Most Acty Vans (Street) will be the newly added 16pin. BE SURE TO VERIFY YOUR CONNECTIONS and select the correct size on check out. These connectors plug directly into your stock Acty harness and have 6″ of wiring that you can then splice/solder to the harness that comes with your aftermarket stereo.
Honda Acty Suspension Kit P-1
WILLpowered Honda Acty Suspension kit Phase 1! The top 2 things we do to a truck when we get it besides basic maintenance and our shift kit is these two parts right here. Stiffer springs give about 3/4-1″ lift in the front which levels the truck paired with WILLpowered strut rod bushings. Strut rod bushings get rid of the death wobble at 50mph but also improve steering and eliminate that metal slap sound when going over small bumps.
For a limited time get both of these essential parts at the same time and save!
Related products
Honda Acty Front Brake Rotors
Replace those rusty 25 year old rotors with these new ones. Fits all HA-3/4 trucks and HH-3/4 vans, sold in pairs (price is for 2 front rotors). The current batch of solid rotors ONLY has the holes for the mounting screw slightly misaligned. This means that the rotor will fit and work as it should but will ultimately be held on by just the rim and lugnuts (just like some other stock setups).
Cross Drilled rotors are designed for maximum efficiency under braking and look amazing while doing so. Mounting holes for Cross Drilled Rotors are 100% correct.
Honda Acty pillar pod trim
Almost two years in the making, our Ronin Werks team has been working behind the scenes to develop these Acty pillar pod trims. We scanned real Honda trim that had been molded with pods to ensure an exact fit into your truck/van. Next, injection molding was the solution to get the quality and durability we insist on. The molding process creates a 95% finished product so customers may wish to paint, texture or trim the piece prior to final installation. We chose to keep the divers side a solid piece to maintain a finished look. To install the handle holes will need to be added prior to installation.
Honda Acty Stage 2-M
Here is our Honda Acty Stage 2-M(Maintenance) kit. Buy everything at same time and save BIG money. Thermostats aren’t catastrophic if they fail and some customers may have replaced them already so it is offered as an option as well as the shaft seals. The seals ride along the shaft and over many miles can create a very slight groove that is sealed as long as you don’t touch the seal. If you dont have oil leaking from the seals sometimes its best to just leave them alone. This kit is for anyone doing basic maintenance but targeted to those who have replaced the fluids and now want the peace of mind that the timing belt is new. All parts fit HA-3/4 and vans HH-3/4.
Kit includes:
(1) WILLpowered Acty water pump with o-ring
(1) Acty E07A timing belt by Mitsuboshi
(1) Acty E07A tensioner pulley
(1) Acty E07A idler pulley
(1) WILLpowered timing belt sticker
(1) Acty thermostat with Honda O-ring (optional)
(1) Acty Front crank seal (optional)
(1) Acty Cam shaft seal (optional)
Honda Extended length wheel studs
Honda extended length wheel studs set of 8. Same ones that come with our big brake kit if you need longer studs to fit aftermarket rims etc. 45mm shank as opposed to the approx 25mm shank of stock studs.
UPDATE – previous studs on our site had 55mm of thread. These have 45mm thread and should be closer to what most people actually need.
